Pay attention to four main points when using horizontal machining center

The horizontal machining center refers to the machining center with the workbench and the spindle set in parallel. The horizontal machining center usually has three linear motion coordinate axes and one workbench rotation axis. After clamping the workpiece at one time, the horizontal machining center can select different tools according to the program, automatically change the rotation speed of the spindle, and complete the processing of multiple processes on multiple surfaces in sequence according to the programming sequence. This kind of machining center is most suitable for processing box-type parts. Next, I will introduce the four main points for attention when using horizontal machining centers.
Horizontal machining center installation environment
The horizontal machining center should be installed away from the source, away from direct sunlight, away from thermal radiation and away from humidity. If there is an earthquake source near the place where the horizontal machining center is installed, an anti-shock ditch should be set around the horizontal machining center. If the shock-proof groove is not set, it will directly affect the processing accuracy and stability of the horizontal machining center. Over time, it will affect the poor contact of electronic components, failure and the reliability of the horizontal machining center.
Strict control of voltage and current
The horizontal machining center is generally installed in the processing workshop, and there are many mechanical equipment in the processing workshop, which inevitably leads to large fluctuations in the power grid. Therefore, the installation position of the horizontal machining center must strictly control the voltage and current of the power supply. The voltage and current of the power supply must be controlled within the allowable range of the horizontal machining center. The voltage and current of the power supply must be kept stable, otherwise it will directly affect the normal operation of the horizontal machining center.
Temperature and humidity will directly affect the horizontal machining center
The horizontal machining center can work normally only when it is under the temperature of less than 30 ℃. Generally, the distribution box of the horizontal machining center is equipped with exhaust fan and cooling fan to ensure that the electronic parts and central processing work at a constant temperature. If the temperature and humidity are too high, the service life of the components of the control system will be reduced, and the number of failures of the horizontal machining center will increase without reason. If the humidity increases, dust will increase on the integrated circuit board, which will directly lead to poor contact and short circuit.
Factory parameter setting of machine tool
When using the horizontal machining center, the customer cannot change the factory parameter settings of the machine tool at will, because these factory parameter settings are directly related to the dynamic characteristics of each component of the horizontal machining center, and only the gap compensation parameter value can be set according to the actual situation. If you want to change the factory setting parameters, you should contact the manufacturer and change the factory parameter settings under the guidance of the manufacturer's technical personnel.